The Planet Crafter Tips & tricks

Planet Crafter Water Level 2026: What Floods and Where to Build Safely

Planet Crafter Water Level 2026: What Floods and Where to Build Safely

The Planet Crafter water level doesn't rise at random. It rises at fixed terraforming thresholds, and at some point it stops. Keep an eye on the height marker and you build once instead of moving three times.

This guide explains which terraforming stage creates water, how high the Planet Crafter water level gets, which places disappear under it and how to tell from the terrain whether your favorite building spot will become a bay later. You also get a checklist of everything you should take care of before the flood.

๐ŸŒŠ Where the Planet Crafter Water Level Comes From

The water level isn't a machine and it isn't a random event. It's a direct result of the Terraformation Index (Ti). The Ti is the sum of oxygen, heat, pressure and later biomass. When it reaches a threshold, the next stage unlocks, and water arrives with two of those stages: first "Liquid Water", then "Lakes".

At "Liquid Water" only small puddles and pools form in the deepest hollows. The real rise happens at the Lakes stage, and it's massive: entire valley floors fill up. The Ti thresholds below come from Steam achievement guides and match the wiki values.

StageTi thresholdWhat happens with water
Barren0 Tibone dry, only ice chunks
Blue Sky175 kTithe sky changes color, no water
Clouds350 kTifirst cloud cover
Rain875 kTirain, but nothing collects yet
Liquid Water3 MTipuddles and pools in the deepest hollows
Lakes50 MTimain rise: basins fill up, bases flood
Moss200 MTiwater also reaches regions that flood late

Important for planning: the Planet Crafter water level doesn't rise everywhere at once. The big basin at the starting point fills first, and other regions follow much later. According to community reports, the Zeolite cave and the shore areas fill up late, and the high waterfall region only gets water toward the Moss stage.

Advertisement

๐Ÿ“Š How High Does the Planet Crafter Water Level Rise?

The number that matters is always on your screen: the coordinate display in X:Y:Z format. The middle value is your height. Stand on your building spot and read it before you place the first foundation.

Miju Games has never published an official final height. The values below are explicitly community information from the Steam discussions, and they line up across several independent threads.

ClaimSourceAssessment
Water stops at height 24Steam discussion, 2024lowest value mentioned
Water reaches height 25 in the starting areaSteam discussion, 2022most frequently mentioned value
Everything from height 26 up stays drySteam discussion, 2024tight, but a working limit
Build from height 27 in the starting areaSteam discussion, 2024recommended safety buffer

In practice: build at height 27 or above and you're on the safe side even where the terrain edges vary. And yes, the rise really ends. Once the Lakes stage is done, the Planet Crafter water level stays put and doesn't rise again, even if you keep terraforming. That makes planning easy: you only have to judge the level correctly once, and the question is settled for the rest of the run.

๐Ÿ“ฆ What to Collect Before the Flood

The good news first, because many guides get it wrong: nothing is lost for good. Crates can still be looted underwater, and in your suit you can dive and interact as usual. What you lose is convenience. Cave entrances disappear under the surface, vegetation grows over them later, and finding the same crate suddenly takes twice as long.

So tick off these points while the basin is still dry:

  • Empty every crate around the landing site and on the valley floor of the starting area. That's where the deepest part of the big lake will be.
  • Check the wrecks in the starting basin. Parts of them will end up under the surface.
  • Clear the Zeolite cave: it floods late, but it does flood. According to community loot lists, one crate sits at 563:5:290, right next to the big white tree.
  • Mark cave entrances in hollows with a Beacon before they're underwater. It's the cheapest trick in this whole guide.
  • Mine the ice chunks in the basin while they're still on land and you can grab them on the way.
  • Remove Ore Extractors from hollows before they drown. According to player reports, they stop working underwater.
  • Write down the coordinates of caves you'll still need. Once submerged, they're hard to find again.
Advertisement

๐Ÿ—บ๏ธ Choosing a Building Spot: Which Areas Stay Dry

The best building spot isn't the prettiest one. It's the highest one within reasonable walking distance. With the Planet Crafter water level, pessimism pays off: better to walk 20 seconds longer than to move half your base later. Three terrain features reliably tell you a spot will end up underwater: a bowl-shaped hollow, smooth, fine sandy ground without larger rocks, and of course any point where the height display drops below 27.

LocationHeight (Y)Rating
Valley floor in the starting area, landing sitebelow 25floods for sure
Shore of the big lake, e.g. 487:26:50926only usable on 3 to 5 foundations
Plain north of the starting area27 and uprecommended, stays dry
High plateau and back areas of the mapwell above 30permanently safe
Waterfall regionvery highgets water late, and only a little

If you still want to use the starting area for convenience: gather there, but live up top. The spots that have proven themselves are covered in detail in the guide to the best base locations. The terraforming basics, meaning where the Ti comes from in the first place, are in the beginner's guide with all terraformation stages. If you're just starting, the typical beginner mistakes are collected in the 15 tips for your start.

โš ๏ธ Base Already Flooded? What Happens to Your Buildings

If the Planet Crafter water level caught you anyway, it's less dramatic than it looks. A flooded room doesn't break, it becomes useless. Rooms fill with water even without an outer door, and you can no longer produce oxygen in a room underwater. That removes the main purpose of your base. Machines that aren't explicitly built for underwater use stop working, and Living compartments can fill up through their air treatment too.

Your crates and their contents stay intact, and you can still reach them. There's no rescue option, though: no pump, no sealing. The only fix is moving. There is one emergency exit if you really want to stop the rise: if you dismantle terraforming machines, the Ti stops climbing and so does the water. The Ti doesn't go back down. This slows your entire progress, so it only makes sense as an emergency brake, not as a strategy.

Advertisement

๐Ÿ”— Moving Out: How to Dismantle Without Losing Anything

Moving is more annoying than it sounds, but it isn't expensive. According to consistent community reports, when you dismantle buildings and machines you get all the materials back 1:1. You don't lose any Titanium or Super Alloy, only time. Players mention 10 to 15 minutes for small bases and up to three hours for large setups.

A sensible order when the water is breathing down your neck: first place a single Living compartment with a door up top so you have an oxygen source. Then empty and relocate your crates. After that, move the terraforming machines, because they carry your Ti. Finally, tear down the empty shell below. If you need resources for the rebuild anyway, the Osmium guide shows where to get them, and the guide to changing planets covers how to take your stock to a new world.

๐Ÿ’ก Whole Map Underwater? That's a Display Bug

One case regularly causes panic: suddenly the entire map, mountains included, is underwater. That's not a terraforming jump. It's a known rendering bug that often shows up after entering underwater areas or hidden places. Reloading the save resets the display without damaging your base. If your progress stays stuck for good, the cause is something else. See why terraforming gets stuck.

โ“ FAQ about the Planet Crafter Water Level

At which stage does the Planet Crafter water level rise?

The first puddles appear with "Liquid Water" at 3 MTi. The real rise comes with the Lakes stage at 50 MTi.

How high does the water rise in the starting area?

Community sources put the upper limit at height 24 to 25. There's no official number, so height 27 is the safe building value.

Where can I see my height in the game?

In the coordinate display in X:Y:Z format. The middle value is your height and your most important measurement against the rising water level.

Does the water level keep rising after the Lakes stage?

No. Once the Lakes stage is complete, the level in the starting area stays put. Some higher regions get a bit more water later on.

Do crates and loot get lost underwater?

No. You can dive in your suit and open crates as usual. Only finding them gets harder, because entrances disappear.

Can I save a flooded base?

You can't seal it, you can only move. You can no longer produce oxygen underwater, and there's no pump in the game.

Checked against version 2.103 as of October 2026. The patch notes for 2.0 and the Skeo update mention no changes to the water level or the stage thresholds. Verified against Steam achievement and community guides and matching values in the Fandom wiki for the terraformation stages.

Explicitly community information and not officially confirmed: the maximum water height of 24 to 25, the recommended building height of 27, the full material refund when dismantling and the crate coordinates mentioned.

Jens Deckardt
Author

Jens Deckardt

Game guides for survival and building games โ€” written by players, checked against patch notes.